Featured

  • Buy Best Use Of Hydrogen Chloride Factory –  Ethane (C2H6) – Taiyu

    Buy Best Use Of Hydrogen Chloride Factory – Ethane (C2H6) – Taiyu

    Technical parameters Specification Specification C2H6 ≥99.5% N2 ≤25ppm O2 ≤10ppm H2O ≤2ppm C2H4 ≤3400ppm CH4 ≤0.02ppm C3H8 ≤0.02ppm C3H6            ≤200ppm Ethane is an alkane with a chemical formula of C2H6, with a melting point (°C) of -183.3 and a boiling point (°C) of -88.6. Under standard conditions, ethane is a combustible gas, colorless and odorless, insoluble in water, slightly soluble in ethanol and acetone, soluble in benzene, an...
  • China Wholesale High Purity Carbon Dioxide Quotes –  Methane (CH4) – Taiyu

    China Wholesale High Purity Carbon Dioxide Quotes – Methane (CH4) – Taiyu

    Technical parameters Specification 99.9% 99.99% 99.999% Nitrogen <250 ppm <35 ppm <4 ppm Oxygen+Argon <50 ppm <10 ppm <1 ppm C2H6 <600 ppm <25 ppm <2 ppm Hydrogen <50 ppm <10 ppm <0.5 ppm Moisture (H2O) <50 ppm <15 ppm <2 ppm Methane is an organic compound with a molecular formula of CH4 and a molecular weight of 16.043. Methane is the simplest organic matter and the hydrocarbon with the smallest carbon content (the largest hydrogen content). Methane is widely d...
  • Buy Best Nh3 Gas Liquid Ammonia Factory –  Silane (SiH4) – Taiyu

    Buy Best Nh3 Gas Liquid Ammonia Factory – Silane (SiH4) – Taiyu

    Technical Parameters Component 99.9999% Unit Oxygen (Ar) ≤0.1 ppmV Nitrogen ≤0.1 ppmV Hydrogen ≤20 ppmV Helium ≤10 ppmV CO+CO2 ≤0.1 ppmV THC ≤0.1 ppmV Chlorosilanes ≤0.1 ppmV Disiloxane ≤0.1 ppmV Disilane ≤0.1 ppmV Moisture (H2O) ≤0.1 ppmV Silane is a compound of silicon and hydrogen. It is a general term for a series of compounds, including monosilane (SiH4), disilane (Si2H6) and some higher-level sil...
  • High Quality Liquid Ammonia Nh3 Gas Cylinder Factory –  Ammonia (NH3) – Taiyu

    High Quality Liquid Ammonia Nh3 Gas Cylinder Factory – Ammonia (NH3) – Taiyu

    Technical Parameters Specification 99.8% 99.999% Units Oxygen / <1 ppmv Nitrogen / <5 ppmv Carbon Dioxide / <1 ppmv Carbon Monoxide / <2 ppmv Methane / <2 ppmv Moisture(H2O) ≤0.03 ≤5 ppmv Total Impurity / ≤10 ppmv Iron ≤0.03 / ppmv Oil ≤0.04 / ppmv Liquid ammonia, also known as anhydrous ammonia, is a colorless liquid with a strong pungent odor and corrosive. As an important chemical raw material, ammonia is usually used to obtain liquid ammonia by pressurizing or...
  • China Wholesale Pure Liquid Bcl3 Gas Boron Trichloride Suppliers –  Hydrogen Chloride (HCl) – Taiyu

    China Wholesale Pure Liquid Bcl3 Gas Boron Trichloride Suppliers – Hydrogen Chloride (HCl) – Taiyu

    Technical Parameters: Specification 99.9% 99.999% Carbon Dioxide ≤ 400 ppm ≤ 2 ppm Carbon Monoxide ≤ 60 ppm ≤ 1 ppm Nitrogen ≤ 450 ppm ≤ 2 ppm Oxygen+Argon ≤ 30 ppm ≤1 ppm THC(as Methane) ≤ 5 ppm  ≤ 0.1 ppm Water ≤ 5 ppm ≤1 ppm Hydrogen chloride has the chemical formula HCl. A hydrogen chloride molecule is composed of a chlorine atom and a hydrogen atom. It is a colorless gas with a pungent odor. Corrosive, non-combustible gas, does not react with water but is easily soluble...
  • Buy Best Boron Trichloride Msds Pricelist –  Hydrogen Sulfide (H2S) – Taiyu

    Buy Best Boron Trichloride Msds Pricelist – Hydrogen Sulfide (H2S) – Taiyu

    Technical parameters Specification     Hydrogen Sulfide 98% % Hydrogen < 1.3 % Carbon dioxide < 2 % Propane < 0.3 % Moisture < 5 ppm   Specification     Hydrogen Sulfide 99.9% % Carbonyl sulfide <1000 ppm Carbon disulfide <200 ppm Nitrogen <100 ppm Carbon dioxide <100 ppm THC <100 ppm Moisture ≤500 ppm   Specification     H2S 99.99% 99.995% H2 ≤ 0.002% ≤ 20 ppmv CO2 ≤ 0.003% ≤ 4.0 ppmv N2 ≤ 0.003% ≤ 5.0 ppmv C3H8 ≤ 0.001% / O...
  • China Wholesale Tank Packaged Isopentane C5h12 Gas Factory –  Refrigerant R410a (CH2F2) – Taiyu

    China Wholesale Tank Packaged Isopentane C5h12 Gas Factory – Refrigerant R410a (CH2F2) – Taiyu

    Technical Parameters Item  Unit  Nominal Value Molecular Formula / CH2F2/CF3CHF2 Molecular Weight / 72.58 Boiling Point ℃ -51.6 Critical Temperature ℃ 72.5 Critical Pressure MPa 4.95 ODP / 0 R410A is a mixed refrigerant with a colorless appearance, non-turbidity, and volatile, with a boiling point of -51.6°C and a freezing point of -155°C. It is a mixture composed of 50% R32 (difluoromethane) and 50% R125 (pentafluoroethane), mainly ...
  • High Quality Cas: 7439-90-0 Rare Gases Factory –  Neon (Ne) – Taiyu

    High Quality Cas: 7439-90-0 Rare Gases Factory – Neon (Ne) – Taiyu

    Technical Parameters Specification ≥99.999% Carbon Oxide(CO2) ≤0.5 ppm Carbon Monoxide(CO)  ≤0.5 ppm Helium (He) ≤8 ppm Methane(CH4) ≤0.5 ppm Nitrogen(N2) ≤1 ppm Oxygen/Argon(O2/Ar) ≤0.5 ppm Moisture ≤0.5 ppm Neon (Ne) is a colorless, odorless, non-flammable rare gas, and its content in the air is 18ppm. It is a gaseous inert gas at room temperature. When low-pressure discharge is performed, it shows a very obvious emission line in the red part. Very inactive, does not bur...
  • China Wholesale Cf4 Carbon Tetrafluoride Pricelist –  Ammonia (NH3) – Taiyu

    China Wholesale Cf4 Carbon Tetrafluoride Pricelist – Ammonia (NH3) – Taiyu

    Technical Parameters Specification 99.8% 99.999% Units Oxygen / <1 ppmv Nitrogen / <5 ppmv Carbon Dioxide / <1 ppmv Carbon Monoxide / <2 ppmv Methane / <2 ppmv Moisture(H2O) ≤0.03 ≤5 ppmv Total Impurity / ≤10 ppmv Iron ≤0.03 / ppmv Oil ≤0.04 / ppmv Liquid ammonia, also known as anhydrous ammonia, is a colorless liquid with a strong pungent odor and corrosive. As an important chemical raw material, ammonia is usually used to obtain liquid ammonia by pressurizing or...
  • High Quality Compressed Argon Gas Factories –  Krypton (Kr) – Taiyu

    High Quality Compressed Argon Gas Factories – Krypton (Kr) – Taiyu

    Technical Parameters Specification ≥99.999% O2 <0.5 ppm N2 <2 ppm H2O <0.5 ppm Argon <2 ppm CO2 <0.5 ppm CH4 <0.5 ppm XE <2 ppm CF4 <0.5 ppm H2 <0.5 ppm Krypton is a rare gas, colorless, odorless, non-toxic, inert, incombustible, and does not support combustion. It has the properties of high density, low thermal conductivity, and high transmittance. When it is discharged, it is orange-red. The density is 3.733 g/L, the melting point is -156.6°C, and the boilin...
  • Buy Best Ethane Price Quotes –  Ethylene (C2H4) – Taiyu

    Buy Best Ethane Price Quotes – Ethylene (C2H4) – Taiyu

    Technical parameters Specification 99.95% min Units Methane+Ethane <0.03 % C3 and higher <5  Ml/m³ Carbon monoxide <1 Ml/m³ Carbon dioxide <5 Ml/m³ Oxygen <1 Ml/m³ Acetylene <2 Ml/m³ Sulfur <0.4 mg/kg Hydrogen <1 Ml/m³ Methanol <1 mg/kg Moisture <0.8 Ml/m³ Under normal circumstances, ethylene is a colorless, slightly odorous flammable gas with a density of 1.178g/L, which is slightly less dense than air. It is almost insoluble in water, hardly soluble in et...
  • High Quality Industrial Ammonia Gas Factories –  Hydrogen Chloride (HCl) – Taiyu

    High Quality Industrial Ammonia Gas Factories – Hydrogen Chloride (HCl) – Taiyu

    Technical Parameters: Specification 99.9% 99.999% Carbon Dioxide ≤ 400 ppm ≤ 2 ppm Carbon Monoxide ≤ 60 ppm ≤ 1 ppm Nitrogen ≤ 450 ppm ≤ 2 ppm Oxygen+Argon ≤ 30 ppm ≤1 ppm THC(as Methane) ≤ 5 ppm  ≤ 0.1 ppm Water ≤ 5 ppm ≤1 ppm Hydrogen chloride has the chemical formula HCl. A hydrogen chloride molecule is composed of a chlorine atom and a hydrogen atom. It is a colorless gas with a pungent odor. Corrosive, non-combustible gas, does not react with water but is easily soluble...

Send your message to us: